FREE - Ludwig caps? & whatever?

amosguy

DFO Master
Joined
Aug 5, 2005
Messages
4,426
Reaction score
527
Location
Redmond, WA
Do you need these Ludwig caps (?) washers. Not sure what what they are for?

Also the 3 pieces on the right are all internally threaded and of unknown use. Identify or do you want them?

IMG_20200329_103733916.jpg
 

thin shell

DFO Master
Joined
Sep 15, 2010
Messages
3,632
Reaction score
801
washer on the left is used for the bass drum mount, and other places, at least in the 70's. The next one with the big hole is used for a bottom washer for a Ludwig hihat clutch and also on some of their marching mallets. Not sure of the rest other than the big one with the pointy tip. It is the bottom nut for an older Tama hihat clutch.
 

thin shell

DFO Master
Joined
Sep 15, 2010
Messages
3,632
Reaction score
801
I think the one on the far left was for SK beater
View attachment 433252
The hole is too big. They used them for the bass drum mount in the 70s for the inside washers. They used speed king bearing caps with a smaller hole drilled in them for the beaters and then peened over the end of the shaft.
 

Latest posts



Top