Setting up KP65 Kick Pad with Iron Cobra Pedal

dasjambo

New Member
Joined
Dec 27, 2019
Messages
2
Reaction score
0
Hi all, I've been having an impossible time trying to figure out how to set up the pedal with the KP65 kick drum (see below). When I step down the pedal, it bumps up against the metal attachment, before the beater reaches the pad. Anyone have suggestions or a photo they could upload of what this is supposed to look like? Thanks very much for any help

IMG_2409.JPG
IMG_2410.JPG
 

Attachments

electrodrummer

Well-Known Member
Joined
Nov 14, 2016
Messages
94
Reaction score
22
Location
London
Can't see the issue from your photos, soz. (you seem to have attached same photo 4 times over)

If I get a few free mins I'll photo one of mine
 
Last edited:

dasjambo

New Member
Joined
Dec 27, 2019
Messages
2
Reaction score
0
Thank you, electrodrummer! That would be a huge, huge help. Here are two more photos: first shows how the beater doesn't reach the pad (pedal is pushed all the way down), second shows what's happening: the top right corner of the pedal is hitting the metal clasp.


IMG_2412.JPG
IMG_2414.JPG
 

Latest posts



Top